TOS8830C為**中國國內銷售機型,可適用于*大輸出AC4KV/100mA(變壓器容量500VA)的耐壓試驗,*大500V/999.9MΩ的絕緣電阻試驗.各項試驗不僅能單獨操作,而且還可執行(耐壓-絕緣電阻)或(絕緣電阻-耐壓)的自動連續試驗.操作盤沿用了傳統產品(TOS8850A/TOS8870A)的[操作性、**性]，采用了指示針識別性能良好的LED數字顯示儀表，為現場操作人員提供了良好的外觀設計?？蛇m用IEC標準等各類**標準試驗（耐壓、絕緣）
TOS8830C is aimed to meet the needs of manufacturing plants across Asia for more compact testers while maintaining the level of quality and reliability inherent in our existing product portfolio. TOS8830C supports withstanding voltage tests involving power outputs of up to 4 kVAC/100 mA (transformer capacity of 500 VA), as well as insulation resistance tests at up to 500 V/999.9 M Ohm. While each of these tests can be conducted separately, it is also possible to have a series of tests run in succession automatically, as in cases where a withstanding voltage test is performed first followed by an insulation resistance test or vice versa. While inheriting the valuable assets of “ease of operation and safety” from its predecessors, TOS8830C adopts an operator-friendly design including an easy-to-view LED digital meter. The structure of the tester and its circuit have also been reviewed and optimized thoroughly, making TOS8830C smaller and lighter.
Note: This model is available for AC Input Voltage of 220V only.
TOS8830C菊耐壓絕緣二合一測試儀特征：
可采用一道工藝處理耐壓和絕緣電阻試驗
耐壓：AC4KV/100mA
變壓器容量：500VA
絕緣電阻：500V/999.9MΩ
操作盤及使用說明均采用中文（簡體字）描述
電壓顯示為3位數字顯示
絕緣電阻測試提供四位數字顯示
利用視窗比較方式將基準值和測試電阻值進行比較
利用PASS或FAIL告知結果
遙控控制功能
時間調節1--99秒
該型號只允許AC220V輸入
Features
- Carries out withstanding voltage and insulation resistance tests in a single process.
- Withstanding voltage: 4 kVac/100 mA
- Transformer capacity: 500 VA
- Insulation resistance: 500 V/999.9 M Ohm
- The operation panel and operation manual are in simplified Chinese.
- The voltmeter provides a 3-digit digital display.
- The insulation resistance meter provides a 4-digit digital display.
- The window comparator method is adopted for judgment.
- Remote control function
- Output of contact point signals such as PASS and FAIL
- Digital timer adjustable to 1 to 99 seconds
